Engine & Fuel

147.07 ex. VAT   177.95
Ultra reliable solid state 12 V and 24 V fuel lift pump for engines, marine generator sets, fuel transfer, fuel polishing, diesel filtration systems and...
In stock
 

59.09 ex. VAT   71.50
Very reliable 12 and 24 V DC electronic fuel pumps ideal for marine engines, generators, diesel heaters as well as commercial and industrial applications....
3 days
 

53.68 ex. VAT   64.95
Manually operated vacuum pump for oil removal, perfect for on-board oil changes without mess or spills. Ideal for engines, generators, outboards,...
In stock
 

3.46 ex. VAT   4.19
Swedish manufactured quality Brass straight male tapered BSPT threaded connector with barbed hose fitting ideal for gas connections, fuel pipes and other...
10 days
 

42.11 ex. VAT   50.95
AISI 316L stainless steel gas springs ideal for cockpit lockers, hatches and engine access covers. Avoids a common injury onboard when heavy unsecured...
Please Confirm
 

63.55 ex. VAT   76.90
Very reliable 12v DC electronic fuel pump ideal for marine engines, generators, diesel heaters as well as commercial and industrial applications complete...
In stock
 

50.37 ex. VAT   60.95
The Delta series 3 way full bore diverter valves from Effebi allow the diversion of fluid without shutting off the flow, as typically found with other...
In stock
 

7.10 ex. VAT   8.59
Marine ISO7840 A1 fuel hose suitable for both petrol and diesel. Black nitrile rubber cover with synthetic textile reinforcement for resistance to...
In stock
 

6.52 ex. VAT   7.89
Simple brass bracket for mounting a ball valve on a bulkhead or other loacation. Once screwed into place the male connector is passed through the bracket...
In stock
 

39.63 ex. VAT   47.95
Nickel plated brass f ull flow 3 way diverter valve "T" flow with 3 x female BSP thread. Ideal for low pressure water distribution, heating, water...
In stock
 

146.24 ex. VAT   176.95
The BEP Marine TS1 is an advanced tank sender suitable for petrol, diesel, water and holding tanks. The TS1 uses ultrasonic measurement technology to...
In stock
+

96.65 ex. VAT   116.95
Cast bronze inlet water strainer with male BSP threaded inlet and female BSP threaded outlet, ideal not only for engines and generators but also for...
In stock
 

1.65 ex. VAT   2.00
Brass connectors with 1/8" - 27 INT male thread and 3/8" 8mm barb for standard 8mm interior diameter fuel hose. Suitable for Facet fuel pumps....
In stock
 

20.62 ex. VAT   24.95
Replacement stainless steel filter and gaskets for the Facet Dura-Lift fuel pump.
In stock
+

2.39 ex. VAT   2.89
Replacement annealed copper compression ring suitable for compression fittings. Sold in packs of 10 rings. Available for 8 mm, 10 mm, 3/8" and 5/16"...
10 days
 

5.94 ex. VAT   7.19
Essential spare or replacement kill / stop cord for outboard engines. The rope core spiral plastic lanyard has a clip and 7 different adaptors for almost...
In stock
+

3.26 ex. VAT   3.94
Quality brass BSP female equal Tee manufactured by Guidi in Italy. Contact us for other sizes. Ref Thread BSP Height Width...
In stock
 

7.44 ex. VAT   9.00
Combined filter hose connector for Facet Fuel pumps. Protects the fuel pump from small particles which could block the pump. 8mm hose bard on one end and...
In stock
+

26.86 ex. VAT   32.50
Replacement transparent screw on filter housing and gasket for the Facet Dura-Lift fuel pumps.
7 days
+

154.50 ex. VAT   186.95
Easily programme your BEP Marine TS1 Ultrasonic Tank Sensor with your custom parameters. The kit includes both the programming device for connection to the...
In stock
+

12.64 ex. VAT   15.29
Stainless steel end fittings for Uflex 316L Stainless Steel Gas Springs. Female M6 threaded connector with either an eye fitting (KSS02) or ball joint...
In stock
 

25.61 ex. VAT   30.99
Replacement filter screen for the Fisherman range of cast bronze inlet water strainers. Available in 4 sizes for the Fisherman filters from 1/2" BSP to...
In stock
 

178.47 ex. VAT   215.95
Quality bronze gear pump with integral switch and hose connection kit for easy engine oil changes. The Marco OCK1-R is compact electric pump designed to...
In stock
 

123.10 ex. VAT   148.95
Sturdy and durable bilge blower manufactured by Plastimo for use in engine compartments or other areas requiring ventilation such as cabins and lockers....
In stock
 

7.26 ex. VAT   8.78
Polished stainless flat mounting bracket for Uflex  Stainless Steel Gas Springs. Available with stud fitting for Uflex eye end fittings (KSS01) or ball...
In stock
 

3.63 ex. VAT   4.39
Brass male BSPT thread hose connector ideal for fuel, compressed air and gas.  Available with 1/4" or 3/8" BSPT tapered thread with hose connector for...
In stock
 

8.67 ex. VAT   10.49
Polished stainless bent reverse mounting bracket for Uflex  Stainless Steel Gas Springs. Available with stud fitting for Uflex eye end fittings (KSS01) or...
In stock
 

8.67 ex. VAT   10.49
Polished stainless bent forward mounting bracket for Uflex  Stainless Steel Gas Springs. Available with stud fitting for Uflex eye end fittings (KSS01) or...
10 days
 

44.59 ex. VAT   53.95
Patented high performance control cables for inboard, outboard, sterndrive, gearboxes, transmissions and other uses onboard. MACH™ cables are the result...
In stock
 

21.07 ex. VAT   25.49
Top quality, mirror polished, heavy duty, precision cast solid stainless steel AISI 316 (A4) air vent cover. Available in two sizes with studs or holes...
In stock