WhatsApp
Cart is empty
Seldén T-Eye Terminal
Upgrade your wire T-Terminal running backstays or check stays with lightweight Dyneema lines. The Seldén T-Eye Terminal adapter allows the use of your existing Seldén T-Terminal backing plates and easily converts the T-Terminal to eye terminals for use with modern low stretch lines. Backing plates are also sold separately if required.
Manufactured from AISI 316 Stainless steel.
Important Note: Seldén T-terminals must only be used with Seldén backing plates. A mix of Seldén terminals and non-Seldén backing plates, and the other way around, is a severe safety risk. The T-terminal size is stamped on the face of the backing plate.
Available in 6 sizes for 3 mm to 8 mm Seldén T-terminal backing plates.
| Seldén T-Terminal Backing Plate Size mm |
Ref. | Ring Diameter mm |
Eye Interior Diameter mm |
Length mm |
| 3 | 174-136 | 4 | 7 | 38 |
| 4 | 174-137 | 4 | 7 | 48 |
| 5 | 174-138 | 6 | 12 | 60 |
| 6 | 174-139 | 6 | 12 | 70 |
| 7 | 174-140 | 8 | 16 | 75 |
| 8 | 174-141 | 8 | 16 | 90 |
